Troubleshooting, rate per hour ($10 minimum)

$75

Test Fire

$35

Zero weapon includes test target

$45

Field Strip, clean, inspect and lubricate

$25

Detail strip, clean, inspect and lubricate

$50

Detail strip and clean magazines, each

$5

Correctly time barrel

$25 and up

Tune and polish COLT extractor, includes part

$43.50

Hardened and machined tool steel, oversized firing pin stop

$35

Colt ejector, installed

$35

Extended ejector, MARS heavy duty, hardened and machined

$55

Machine frame relief for barrel lower lug clearance

$15

Gold Cup style opened/flared ejection port, relieve inside

$58

Furnish and install Colt plunger tube

$28

Restake plunger tube

$10

Restake grip bushings $5.00 each

$15/SET

Colt recoil guide and cap

$32

Trigger job on Colt factory parts

$90 (Series 80 add $25.00)

MARS hardened tool steel sear upgrade

$36

Weld and refit thumb safety as necessary, (with trigger job)

$15

MARS Hard Use Lockwork kit - Koenig hammer, MARS Sear, springs, disconnector, new hammer/sear pins, Titanium strut, includes trigger job

$250

STI carbon fiber/stainless steel trigger, long or short length

$48

MARS solid aluminum trigger with Integral Overtravel Stop, long, short or medium length

$55

Heinie Lightweight aluminum match trigger- solid aluminum shoe with internal lightening cuts and skeletonized bow

$55

Competition trigger job with MARS ultralight lockwork kit- Koenig LW hammer, MARS sear, STI trigger, Ti strut and MS cap, Special sear and mainsprings

$325

Heinie Sights (Classic or SlantPro)

$180

Heinie or Novak, Low Mount Carry sight set

$165

Heinie Low Mount rear sight, fit to existing Novak sight cut

$60

Novak Cross dovetail front sight with tritium insert, (with or without white outline), installed in existing sight cut

$90

Retro style high profile rear sight installed in factory dovetail; machine slide, furnish and install dovetail front sight

$125

BoMar BMCS adjustable rear sight, low mounted with hidden rear leaf, (rear sight only)

$175

Wilson adjustable rear sight, low mounted with rear flush to slide on Gold Cup, (includes relocating elevation screw and cross dovetail front sight)

$275

Furnish and install custom Trijicon insert, includes refinish of sight (only). Specify plain or white outline, charge per insert

$45

Machine slide, furnish and install dovetail front sight with roll pin

$65

Remove factory dovetail sights and install compatible aftermarket replacement sights, (labor only)

$35

Machine front sight to narrower profile or open rear notch

$25

Colt factory safety, matte blue or stainless finish, blended to frame

$70

Brown extended safety - blue or stainless finish; tactical, wide or custom width

$75

Brown ambidextrous safety - blue or stainless finish; tactical wide or custom width

$150

TIG weld sear stud and refit

$25

High grip beavertail, blue or stainless

$135

Barrel bushing, heat treated, heavy duty; fit "hand tight"

$58

Polish and throat barrel

$55

Colt factory hammer forged barrel, .45 ACP, with MARS oversized OS bushing, fit “hand tight”

$225

Kart "semi drop in" forged Chromoly barrel with bushing, link and pin

$255

Kart forged chromoly barrel with bushing, link and pin

$350

Schuemann stainless steel barrel with bushing, link and pin

$355

Machine barrel bed as required, additional

$45

Slide to frame fit - weld and machine rails; hand lap and polish

$225

Crown and polish muzzle

$28

Machine bevel magazine well

$55

Furnish and install S&A mag guide, machine blend to frame

$115

Furnish and install S&A mag guide, hand blend to frame

$175

Furnish and install Heinie mag well - hand blended to frame with inletted grips

$275

Point up checkering on S&A guide

$30

Bevel outer sides of S&A guide

$45

Relocate mainspring housing retainer pin hole on S&A guide

$50

Blend rear of slide and extractor, hand serrate @ 40LPI (requires oversized firing pin stop, $35)

$55

Dehorn sharp edges of pistol inside and out

$95

Machine border on slide shoulder

$95

Machine bevel on bottom of slide

$55

Flatten top of slide

$60

Flatten slide stop pin

$28

Machine forward cocking serrations - Colt Government style

$85

Machine forward cocking serrations - Colt Gold Cup/XSE style

$115

Snakeskin front strap and flat mainspring housing (includes barstock housing, true and high cut front strap and housing)

$325

Scallop front strap and flat mainspring housing (includes barstock housing, true and high cut front strap and housing)

$250

Golf Ball front strap and flat mainspring housing (includes barstock housing, true and high cut front strap and housing)

$285

Checker frontstrap and mainspring housing (includes barstock housing, true and high cut front strap and housing) 20, 25 or 30LPI

$375

Serrate frontstrap and flat mainspring housing - Gold Cup/Combat Elite style @ 20 or 30 LPI (includes barstock housing, true and high cut front strap and housing)

$175

add S&A "drop in" mag guide to above

$45

Snakeskin, Scallop, Golf Ball or Serrate S&A guide, (includes truing guide) add to above prices

$75

True frontstrap and relieve for high grip

$95

Machine front strap for high grip - Colt Enhanced style

Blend mainspring housing to frame and true

$35

Manganese phosphate complete pistol, abrasive blasted finish (U.S. Mil-spec DOD-P-16232F Type M)

$135

Cerakote complete pistol, includes manganese phosphate primer

$275

Satin Hard chrome finish (flats and lines detailed and trued)

$295

Matte black oxide finish complete pistol

$125

Satin black oxide finish complete pistol (fine glass bead blast)

$150

Black oxide finish with 400grit Hand polished flats and matte rounds

$225

Detail pistol - true lines, polish tool marks, remove rust/pitting/scratches, etc, minimum

$35

Refinish small parts, any finish (chrome, oxide, phosphate, Cerakote), minimum charge

$15

Dawson light rail installed, includes installing SureFire light adaptor

$165

Drill and tap magazine, install hard rubber base pad

$10

Fit grips

$15 - $35

Fit grips for ambidextrous safety

$20 - $45

$15

$10

TiG welding, minimum charge

$20

Surface grind slide flats

$80

Machine aluminum frame and install hardened steel insert, machine and polish feed ramp

$125